Laminate Flooring - Installation at a glance
1. Unroll the underlay and put it on the prepared subfloor. |
2. Center and align the planking area and cut the first row to size. |
3. Use the spacer wedges to guarantee the expansion space of at least 8 - 10 mm towards all walls and structural parts within the room. |
||
4. The last board of the first row is cut to the right size - don't forget to include the wall spacing. The cut-off piece is used as the starting piece for the second row. |
5. Start your next row from the left hand side like before. Simply click together the planks' longitudinal sides. The use of glue is not required here. |
6. Join the short end sides together using a hammering block. Continue to install the rest of the room in this manner. (Laminate Flooring Trendtime 1, 2 and 3 are featuring a different type of locking mechanism on the shortend side.) |
||
7. Use a cut-off piece to transfer the profile of the wall to the last row of planks. |
8. Cover the gaps all around the flooring area with matching skirtings from Parador's wide selection. |
9. You are done! |
||
Prior to installation please refer to and obey the rules of installation that are stated
on the following pages. Paying attention to these rules and advice is a prerequisite for
successful installation and also guarantees that your newly installed laminate flooring
will be a long-term asset.